Steel bar cutting and straightening machine

Basic Info

Condition: New

Certification: ISO 9001:2008

Automation: Automatic

Suitable for: Other

Additional Info

Brand: BoRong

Transportation: Ocean

Place of Origin: HeBei of China

Product Description

Precautions when using
   1. Before using the machine, the power should be turned on first, and the test operation can be used only after there is no abnormality.
   2. Before use, you should understand the relationship between the direction of the swivel and the direction of the steel bar. The bar should be inserted counterclockwise in the direction of the swivel rotation (the same direction as the positive bolt).
   3. When using, insert one end of the reinforcing bar into the straightening machine to the outlet end, then adjust the two bolts in the rotating body. The straightened steel bars are automatically spit out during the rotation of the straightener.
   4. Note: It is forbidden to insert steel bars before the machine is started.

Product description

   The fully automatic CNC hydraulic bar straightening cutting machine is a machine used for straightening and rebaring of steel bars on construction sites. It is suitable for straightening and cutting of ordinary disc snails on construction sites, steel processing shops, etc. Equipped with a computer numerical control panel, easy to operate and agree to get started. This shop has a variety of models, please contact customer service for details.

Maintenance and lubrication

   1. Clean all parts of dust, debris and rust in time to prevent oil from rust.

   2. Always check whether the oil level in the machine cavity is above the oil mark.

   3. If the machine stops working for a long time, the motor needs to be removed.

   4. After the first refueling, the new oil should be replaced after one month. After 6 months, the bearing should be added with calcium grease (butter).

Technical parameter