bossgoo服务/售后/程序多重升级

Automatic Rendering Plastering Machine for Wall

Unit Price: USD 4500.0000 - 5000.0000 / Piece/Pieces
Min. Order: 1 Set/Sets

Basic Info

After-sales service: Online Technical Support, Free Spare Parts

Application scenario: Other

design style: Chinese

Types of: Wall Coating

place of origin: China

use: Household

Warranty Service: 1 Year

Power: 1.5kw

Voltage: 220v/380v

Efficiency: 500 square meter/8h

Plastering Way: Vibration Plastering

Vibrator: 3 Vibrators

Plastering Height: ≤5m

Plaster Width/time: 80cm

Plastering Thickness: 5-30mm

Perpendicularity Degree: Max 2mm

Console Dimension: 2.6m*0.3m*0.23m

Additional Info

Packaging: Wooden Case

Productivity: 100 sets per month

Brand: Borong

Transportation: Ocean,Land

Place of Origin: HeBei of China

Supply Ability: 100 sets per month

Port: Tianjin,Qingdao

Product Description


Product description

 

Our stucco wall machine can be completely wiped to the top without leaving a distance of one millimeter, and the yin and yang angles can be used in the proper position. At the same time, the positioning is fast, the positioning is very fast, and it can be flattened vertically in about 10 seconds. Combining the two departments and traditional management, the problem of slow laser positioning, difficult positioning and large error is solved. The use of a vibrator and the addition of a wiper solves the problem that the artificial applicator wall is prone to hollowing and cracking.

The machine has the advantages of simple operation, beautiful appearance, stable operation, sturdy and durable, convenient movement, rapid positioning and no need for disassembly, which greatly improves the material utilization rate and engineering progress.



Plastering machine plastering technology

(First) Plastering works:

  In order to ensure the quality of the plastering project and avoid cracks, hollow drums, ash, etc., the following practices and measures are taken:

1. The mortar used in the plastering project should be stirred in strict accordance with the mix ratio.

2. The mix ratio and consistency of the plastering mortar should be used only after passing the inspection. Mortar mixed with cement or gypsum should be controlled to be used before initial setting.

3, in the construction in strict accordance with the normative standards to request and guide the construction: yin and yang angle to find the side, set the standard ribs, layering leveling, dressing, surface calendering.

4. Before the plastering, the brick wall must be watered and wetted in advance.

5. When admixture is used in the mortar, the amount of the admixture should be determined by experiment.

6, Plaster with lime paste, drenched with chunks of lime, must be sieved with a sieve with a pore diameter of not more than 3mm × 3mm, and stored in the sedimentation tank. Curing time:  generally not less than 15 days at room temperature, not less than 30 days when used for covering. The lime paste must not contain uncooked granules and other impurities during use.

7. For indoor walls, cylinders and corners of the door, it is advisable to use 1:2.5 cement mortar as the corner guard. The height should not be less than 2m, and the width of each side is not less than 5cm.

8. The pre-embedded line pipe groove of the wall is first filled with 1:2 cement mortar and 3% expansion agent. The reserved hole on the wall is filled with C20砼 with 3% expansion agent. After the wire mesh is nailed, it is plastered. .

 

(Second) Plastering of the outer wall of the outer wall:

1. Grassroots cleaning:

Before the exterior wall is smeared with ash, the mortar, wood chips, loose crepe parts, etc. remaining on the surface of the base layer are cleaned and watered.

2. The outer wall reserved hole is filled:

(1) Firstly, the residual mortar, loose lumps, stones, etc. in the reserved hole are chiseled off, and the outer sides are chiseled into the outer eight bell mouths, and washed with water.

(2) Apply a cement slurry with a water-cement ratio of 0.4 to 0.5 in the vicinity of the wall of the cave.

(3) The two side molds fill the dry hard enthalpy of the proper amount of expansion agent and water repellent.

3. The external wall screw hole is filled:

(1) Both sides of the screw hole are chiseled into an outer bell mouth, and the sleeve inside is cut off.

(2) Fill the holes with a 1:2 dry hard cement mortar with an appropriate amount of expansion agent and water repellent plug.

(3) The round steel (outer water sealing tape) of the corresponding diameter is clamped into the PVC casing at both ends by about 5 cm.

(4) Seal the PVC casing shearing surface with waterproof material, and then fill the bell mouth with cement mortar (with appropriate amount of expansion agent and waterproof agent).

4. According to the design requirements, the 10×10 chute should be cut at the junction between the shear wall and the masonry, and the next step can be carried out after filling with the waterproof grease.

5, the outer wall window frame seam and surrounding practices:

(1) The gap between the door and window frame and the wall should be between 2.0 and 2.5 cm. After the frame is cleaned, the silicone caulking required by the design is used.

(2) The exterior window sill is high and low inside, and the inner window sill is 2cm higher than the outer window sill.




Tech Parameter


Name

rendering machine

Model

CFQ500

Efficiency

500 square meter/8h

Power

1.5kw

Voltage

220v/380v

Plastering way

Vibration plastering

Vibrator

3 vibrators

Plastering height

≤5m

Plaster width/time

80cm

Plastering thickness

5-30mm

Perpendicularity degree

Max 2mm

Level degree

Max 2mm

Moves

Automatic Walking

Lifting speed

3.6 m/30s

Host Dimension

1.05m*0.8m*0.8m

Console Dimension

2.6m*0.3m*0.23m

Total Dimension

0.9 cubic mete






自动墙面抹灰机


自动墙面抹灰机

自动墙面抹灰机


As a professional machinery manufacturer, we do have different kinds of construction machinery. Thread Rolling Machine For Sale, contact me if you need it. We will offer you a reasonable Roll Thread Machine Price and best Thread Rolling Services. Besides this Z28-80, we do have Z28-200 Type Thread Rolling Machine, they are both High Speed Thread Rolling Machine. Also we have Steel Straightening Machine, Rebar Bending Hoop Machine, Hydraulic Concrete Converying Transport Pump, and so on. The most important, it can be customized according to various needs.


Concrete Transport Pump> Fine Stone Concrete Transfer Pump> Electric mobile fine stone concrete mortar pump
Concrete Transport Pump> Fine Stone Concrete Transfer Pump> Mini Concrete Pump Machine
Concrete Transport Pump> Fine Stone Concrete Transfer Pump> Portable Hydraulic Concrete conveying transport pump
Rebar Mechanical Equipment> Automatic CNC Bending Machine> Automatic Steel Bar Bending Machine
Rebar Mechanical Equipment> Automatic CNC Bending Machine> Automatic hook straightening steel bar machine
Rebar Mechanical Equipment> Automatic CNC Bending Machine> Steel stirrup bending machine
Rebar Mechanical Equipment> Automatic CNC Steel Bending Hoop Machine> Steel bar straightening and bending hoop integrated machine
Rebar Mechanical Equipment> Steel Bar Straightening And Cutting Machine> Steel bar cutting and straightening machine
Rebar Mechanical Equipment> Steel Bar Straightening And Cutting Machine> CNC steel bar straightening and cutting machine
Rebar Mechanical Equipment> Steel Bar Straightening And Cutting Machine> CNC Reinforcement Straightening And Cutting off Machine
Rebar Mechanical Equipment> Steel Bar Straightening And Cutting Machine> Rebar Steel Straightening and Cutting Machine
Thread Rolling Machine> Steel Bar Reducing Diameter Machine> Steel Rebar Reducing Diameter Machine
Thread Rolling Machine> Steel Bar Reducing Diameter Machine> Material Feeder For Thread Rolling Machine
Thread Rolling Machine> Threaded Roll Machine For Steel Rod> Type Z28--200 of Hydraulic Thread Rolling Machine
Thread Rolling Machine> Screw Thread Rolling Making Machine> Z28-80 type of Hydraulic Thread Rolling Machine
Thread Rolling Machine> Rebar Straight Thread Rolling Machine> Hydraulic Thread Rolling Machine